Prices exclude VAT. Delivery cost on
application.
Automatic Laminating Systems
Fujipla Al-Meister
Automatic Laminator £6850
Automatic
single
side laminator and encapsulator.
pdf brochure click here.
Breakthrough in lamination
Operation is fully automated
Copy-machine like accessibility in 3
steps.
1 set papers on to the feed tray
2 just press start, and
lamination is done automatically. The progressive automatic paper feeder loads
up to 200 sheets
3 laminated papers come out one
by one on the tray
Fully Automatic Laminating Machine
The birth of the next generation
laminating to exceed traditional models.
Al-Meister has functions such as an
automatic feeding, laminating, and automatic framing capabilities. All
operations are automatically handled! The operator simply puts the documents
they would like to laminate into the feeder, pushes the start button and all of
the laminating work is done automatically.
Swift and Easy Laminating Process.
The machine laminates from one sheet to
many.
Every operation is automatically done
including setting the film, inserting operation, etc. It takes only 3 minutes to
finish laminating 10 sheets of A4. For A3 sized paper it takes only 5 minutes.
According to our survey, the operation takes almost half the time of traditional
laminating machines. Al-Meister takes care of laminating
operations for one sheet to a mass production.
High Performance Automatic Feeder
With the automatic feeder it is now
possible to laminate continuously!
The advanced automatic feeder enables
loading of up to 200 sheets and will drastically reduce the work of the
operator. Patented technology from Fujipla automatically aligns and guides the
paper and the automatic feeder continuously provides paper.
Simple Operation
Anybody can operate Al-Meister easily
Basic operation is very simply done with
the start and stop buttons. The LCD panel shows the status of the operation,
settings and the counter. When the operation is complete a sound notifies the
user.
Automatic Trimming
Automatic trimming in two modes widens
its application.
Al-Meister automatically senses the size
of the paper (A3 or A4) and selects the proper size. There are two modes. One is
, laminate with a highly durable and waterproof effect. The other is, laminate
without margin, which is convenient for documents only requiring surface
treatment. The modes can easily be changed. The film waste will be automatically
saved in to the film waste box.
Short Warm-up Time
Can start the laminating operation in a
very short time.
It takes only 5 minutes to warm up the
machine, which is far quicker than usual machines. You can start laminating
sooner.
Laminating
Film
Possible to choose appropriate film
according to its application.
Al-Meister uses the exclusive AL-ROLL
FILM, which has excellent adhesiveness with static protection of the thickness
from 38 up to 125 microns at 320mm wide. A single sided film of 30 micron is
also available with a width of 317mm.
AutoLine System Price
on application
Single
side laminator and encapsulator.
Laminating speed 10m/min. Automatic feeding and cutting. Surelam Plus-PCR800DBS
model comes with PerforatorFilm cutter Rewinder Burster cutter.
Maximum laminating speed of 10m/min
Size of Machine (WxLxH) 1140 x2.500x 1210
Interlink combination of Q-FEEDER-800
Q-CUTTER-800 and LAMINATOR
(Can be fitted to most Roll Laminators)
Consumption of film
PET base Heat Seal Laminating Films from
25 mic up to 250 mic
PHOTONEX Film (PVC Base Embossed)
100 mic up to 500mic
POLYNEX Film (Thermal OPP) 25 mic up to 40mic
Special Features
Compact design allows installation in small space
(W:1.340 / L:3.000 / H:1.035)
Efficient cooling system for high speed laminating
Can be used for double or single sided lamination
Autoburster (OPP Auto Cutter) for full automatic
single sided laminator system
Various size of film or paper acceptable
(W : 210~800mm L : 297~1.000mm)
Film Slitter Perforator
Q-FEEDER
Overlay (Overlap)
feeding for one side laminating and interval feeding for double side laminating
Vacuum generation device through normal compressor (No
any expensive air compressor required)
Optimum condition for normal compressor
- Small compressor saves cost of installation and operation
- Minimal noise during operation
12 cylinder operated feeder part: Suitable for various paper feeding
(patented)
Automatically adjusts to your laminator speed
Minimum control equipment to change paper for easy operation
Computer controlled for precise operation
Main parts of feeder are linked through mechanical device which minimizes error
or failure and ensures long-time operation
Compact design allows installation in small space
Q-CUTTER
Full automatic
cutter suitable for laminating service shop and industrial laminating process
Microprocessor controlled for precise cutting and sheeting
Excellent cutting performance by specially designed round cutter sharpened
automatically
Compact design allows installation in small space
PET Nylon OPP and other various films can be used
Marginal cutting function separate allocation of front/rear margin
Cutting of designated part through + margin & - margin function
Cuts counting device installed
Independent usage when linked with other laminator test
Technical data
Pioneer 7000BC
Price on application
Pioneer 8000BC
Price on application
Paper
Size: (W)800mm x (L) 1100mm
Laminating Speed : 50m/min - 788mm x 1090mm 2,300 sheet/hrs
Single side Laminator with a Laminating speed of 50m/min
Automatic feeding, Nicking, Slitting, Mini rewinder, Automatic Burster
Automatic Stacking Table (option), Embossing roller (option)
Special Features
*This laminating is what the chroma of a coupler is superior without any fine
bubble
*It makes use of the inexpensive Polynex (OPP) and Nylonex that has no curling &
scratch
*With full GMP Technology, the most compact machine in the world - needs little
space to install
*Suitable for Mass Production of Offset & Digital Printing with Laminating Speed
50m/min
*All electronic Functions are controlled by a Simens PLC, Servo motor and
Driver.
*After Lamination, the laminated paper is stacked automatically
*Internet network on-line system (Option)
*Suitable for Manufacturing of small batches with various classes.
Technical data
