Rovert Logo

   
        

To see our exciting new website Click Here

Tel: 0800 083 8740

 

Business Card Cutters

 

 

CardMate Business Card Cutter £85.00

The CardMate business card cutting machine is a revolution in home and small office business card production. This amazing machine will allow you to cut business cards in seconds. This machine is an excellent tool that works in conjunction with your laser and inkjet printers and copiers. Simply print your business cards onto an A4 sheet to the measurements provided, insert into the CardMate, turn the handle and see your cards cut to size instantly, completely removing the need for cutting cards individually using manual guillotines. The CardMate is capable of cutting 60 cards in 60 seconds and can cut up to A4 paper size up to 300 gsm. Cuts business cards to size 85 x 54mm, that's 10 to an A4 sheet and works with CorelDraw, Microsoft Word & Lotus. It is extremely safe to use as it is a manual machine and requires no electricity.
 

 

Business Card Slitter/Cutter Discontinued new model below

This business card slitter is designed to cut paper and laminated business cards and can cut 10 cards from an A4 sheet. key features:- • affordable desk-top solution for perfect business cards • features two independent cutting mechanisms • first cutting mechanism cuts two longitudinal strips • second mechanism cuts five cards from each strip • sheets need to be inserted manually • the machine is supplied with templates for different size cards
Specification
Maximum working width 325mm, Basic setting 90 x 50mm, Weight of paper 80-400 gsm, Cuts 5500 cards per hour, 240 Volt, Size W 442 D296 H 293mm

 

Business Card Slitter CS325 Modular. Machine with 1 module £1395. Extra modules £750

The CS 325 Modular Card Slitter is a robust and simple to operate A4 format machine with a single feed system and the benefit of modular or interchangeable slitting tools for versatility of job size.

As well as the standard size 85 x 55mm slitting tool tool single or double cut ( 4mm margin), additional tools can be supplied to non standard sizes with or without double cut margin.

The tools are supplied in pairs for each specific size with one tool for the longitudinal pass and another for the latitudinal pass. The tools are easily exchanged in seconds.

Benefits

- Heavy duty design with slitting up to 400gsm card
- Compact and portable with small footprint
- Precise hard wearing slitting tools
- Business cards produced simply and easily with no major set up
- Standard and custom sizes available with double cut gutter margin if required

Specification

- Maximum working width 325mm
- Paper thickness 80 – 400 gsm

Cutting tools choose from:
- 85 x 55mm Cutting tool – 10 cards A4
  single or double cut
- 90 x 55mm Cutting tool – 10 cards A4
  single or double cut
- 90 x 50mm Cutting tool – 12 cards A4
  single cut
- 90 x 50mm Cutting tool – 10 cards A4
  double cut

- Custom options available with or without 
  double cut margin
- Dimensions 440 x 280 x 240mm
- Weight 14 kg
- Voltage/Frequency 230v/50Hz

 

 

BC 10 Fully Automatic Business Card Cutter from £13.25 per week

See PDF for more info.

1. Easy to operate

BC-10 is designed to operate simply at the touch of a button for selecting the cutting modes, such as paper size and trimming margin.

2. Unique Sharpening System

Unique automatic self-sharpening system

3. Ultra Long Life

Enables you to cut approx. 1.7 million A4 size or letter size sheets (in single cutting mode), so that you can make approx. 17 million business cards.

4. Easy set-up for different sizes of business card

Mechanical settings for the major card sizes and trimming margins are automatically adjusted at the touch of a button (cutting mode button).

5. Accuracy

The position of initial cutting edge in paper feed direction is so accurate that the cut line does not deviate from the correct line throughout the cutting operation (Tolerance of cut size: ±0.05mm). Correction of any potential cutting line deviation is enabled by the detection and alignment of the register line mark printed at the top of each sheet.

6. Easy maintenance

In case of a specific error, a code number is displayed on the display panel to facilitate identification of the source and help to eliminate it.

7. Economy

The cutter is 20 times more durable than that of some other cutters in this range. It can also make 10 business cards on A4 size or letter size sheet, in contrast to some other cutters that can make only 8 business cards on one sheet. (ln double cut mode).

8. Safety

For the safety of any and all personnel who will operate the BC-10 a reliable, safety Interlock system automatically stops operation while the top cover is open or if the paper waste disposal box is not set in its proper position.

9. Optional perforation and scoring device

Optional perforation device or scoring device can be easily installed in place of the cutter device for business card. The perforator enables raffle/draw tickets, entrance tickets etc. The scoring device Is a help to make greeting cards, half-folded business cards, membership cards etc.

 

Business cards as easy as 1..2..3.. see how it works

It's this easy!

1. Layout your business cards on on a template using a PC or Mac.

2. Print out your sheet on to any board up to 300gsm using your copier or printer.

3. Insert your printed sheet/s into the BC-10 sheet feeder and press start.

4. Seconds later your finished perfectly cut business cards are ready to hand out.

 

Ultra Cut 130 Automatic Business Card Cutter £P.O.A

The Ultra Cut 130 Explained...

Designed to cope with short runs with fast set up, the Ultra Cut 130 is the ideal solution for on-demand business card making. Additional applications can also be produced such as postcards, photo cards and tickets. Optional perforating and scoring modules extend the capabilities of the Ultra Cut 130 even further, allowing the user to modify the job.
 

Highlights

bullet130 bcm - The most productive machine in its class
bullet12 job programs
bulletHandles 120-350gsm stocks
bullet100 sheet (25mm) feed pile height for unattended operation
bullet0.1mm increments and ±0.2mm accuracy
bulletFeeds SRA4 for a lower click charge
bulletOptional perforating and scoring modules
bulletUser-friendly control panel
bulletCut mark detection

Typical Applications

bullet85mm Business Cards
bullet90mm Business Cards
bulletPostcards
bulletPhoto cards
bulletTickets
bulletGreeting Cards

Optional Extras

bulletPerforating module
bulletScoring module
bulletPostcard module
bulletPhoto card module

 
PDF: Click here for PDF


 

Versa Trim Cutting Machine £P.O.A

The New VersaTrim is newly designed for multiple card sizes like Post cards, Greeting cards, Gift cards, Point cards and Business cards etc. This VersaTrim fully achieves "on-demand" finishing with digital printers providing excellent and precise finishing.
•For various card sizes
•Equipped 3 standard slitters for business card, post card, half cut ETC.
•Simple operation

One machine for cutting

: Business Cards
: Post Cards
: A4 into A5
: A4 into A6

 

 

 

 

 

All major credit cards accepted
To buy online visit our online shop at
www.paper-handling-uk.com

Contact Information

Telephone   0800 083 8740 or 0151 336 2122
FAX    
0151-336-8997
Rovert House, Water Tower Road, Clayhill Industrial Park, Neston, South Wirral. CH64 3US

email: info@paper-handling-uk.com

Home   Binding    Laminating  Print Finishing    Guillotines & Trimmers   Shredders & Balers  Printing Equipment  Refurbished Equipment  Terms & Conditions Links

Copyright © 2011  Rovert Equipment Company Ltd.