|
Technical Data Auto Laminating Systems
Autoline System
| Model |
Q-FEEDER 800 |
Q-CUTTER 800 |
SURELAMPLUS-800DS |
| Operating Speed |
10 m/min |
A4(210)-25sheet A1(595)-20sheet |
15 m/min |
| Operating Width |
800mm |
800mm |
800mm |
| Laminating Films |
32 mic~250 mic |
32 mic~250 mic |
32 mic~250 mic |
| Thickness of substrate(Paper) |
80g/?~500g/? |
80g/?~500g/? |
80g/?~500g/? |
| Power Requirements |
AC 220V-240V / 50/60Hz |
AC 220V-240V / 50/60Hz |
AC 220V-240V / 50/60Hz |
| Power Consumption |
- |
- |
3300W 13.9A |
| Operating Temperature |
- |
- |
150? Max. |
| Speed Control |
Key Pad |
Knob & Volume |
Key Pad |
| Film Core |
- |
- |
19-77Dual |
| Cooling System |
- |
- |
Blower |
| Type of Main Motor |
DC Geared Motor 120W |
DC Geared Motor 120W |
DC Geared Motor 120W |
| Dimensions(WXLXH) |
1140 X 1200 X 1140 mm |
1340 X 1085 X 943 mm |
1115 X 615 X 1210 mm |
Pioneer 7000BC
| SPECIFICATION |
| Model |
PIONEER-7000BC |
| Laminating Speed |
5~30m/min(A1) |
| Maximum Laminating Size |
700(W) x 1100(L)mm |
| Minimum Laminating Size |
210(W) x 250(L)mm |
| Paper Thickness |
120g/? ~ 400g/? |
| Feeder Loading Height |
650mm |
| Out-put Stacker Height |
n/a (jogging Table) |
| Laminating Film |
Polynex (Thermal
OPP,25mic~40mic),NYLONEX (27mic~44mic) |
| Power Requirement |
400v/50/60Hz,3Phase |
| Power Consumption |
14kw, 18A |
| Heating System |
Pressure Water Heating System |
| Operating Temperature |
90?~140? |
| Operating System |
XGT Programmable Logic Controller |
| Main Motor |
1.5kw Servo Motor with Servo Driver |
| Feeder Motor |
0.4kw Servo Motor with Servo Driver |
| Burster Motor |
0.43kw Inverter Motor with Vector Driver
|
| Riwinder Motor |
25W Induction Motor with Vector Driver
|
| Vaccuum Pump |
Rietschle-25L Vacuum Pump |
| Nip Pressure |
Pneumatic (Air Pressure 3Tones at
0.7MPa) |
| Film Core |
Air Shaft (Adjustable laterally) |
| Cooling System |
Bolwer & Cooling tube |
| Temperature Control |
PID Control |
| Dimensions (WxLXH) |
1,440x2,890x1,490mm |
| Stacker Size (WxLXH) |
- |
| Jogging Table Dimensions (WxLxH) |
870x1290x1490 mm |
| Feeding |
GMP Syncro Stream Feeder |
| Cutting |
Burst Cutting with Nicking Knife and
Perforator |
| Embossing |
Optional Emboss Roller |
|
Pioneer 8000BC
| SPECIFICATION |
| Model |
PIONEER-8000BC |
| Laminating Speed |
5~50m/min(A1) |
| Maximum Laminating Size |
800 X 1100mm |
| Minimum Laminating Size |
210 X 250mm |
| Paper Thickness |
120g/? ~ 400g/? |
| Feeder Loading Height |
750mm |
| Out-put Stacker Height |
500mm |
| Laminating Film |
Polynex (Thermal
OPP,25mic~40mic),NYLONEX (27mic~44mic) |
| Power Requirement |
AC 380V,3Phase,60Hz |
| Power Consumption |
16 kw , 23A |
| Heating System |
Pressure Water Heating System |
| Operating Temperature |
90?~140? |
| Operating System |
Siemens S7 300
Programmable Logic Controller
|
| Main Motor |
Siemens 2.5kw Servo Motor with Master
Serbo Driver
|
| Feeder Motor |
Siemens 0.4kw Servo
Motor with Master Serbo Driver |
| Burster Motor |
Siemens 0.4kw Inverter Motor with
Micromaster Vector Driver |
| Rewinder Motor |
25W Induction Motor with Micromaster
Vector Driver
|
| Vaccuum Pump |
Becker-T4.40 DSK Vacuum Pump |
| Nip Pressure |
Pneumatic (Air Pressure 6Tones at
0.7MPa) |
| Film Core |
Air Shaft (Adjustable laterally) |
| Cooling System |
Bolwer & Cooling tube |
| Temperature Control |
PID Control |
| Dimensions (WxLXH) |
1,540 x 3,100 x 1,517 mm |
| Stacker Size (WxLXH) |
1,420 x 1,230 x 1,250 mm
|
| Feeding |
GMP Syncro Stream Feeder |
| Cutting |
Burst Cutting with Nicking Knife and
Perforator |
| Embossing |
Optional Emboss Roller |
|
Return to products
|
